Hey there, fellow pool owners and fellow Plastic Swimming Pool Pumps customers! Plastic Swimming Pool Pumps

I’m Mark, and if you’re reading this, chances are you’re staring down the end of pool season—maybe you’ve already packed up your inflatable liner, the kids’ beach toys are in storage, and that big plastic pump that kept your water clear and moving all summer is sitting in the corner of your backyard shed, covered in a thin layer of pool dust. If you’re like most people, you might be thinking, “Can’t I just leave this thing outside covered with a tarp and pick it up when it’s time to open the pool next year?”
Let me stop you right there. I’ve been selling and servicing plastic swimming pool pumps for over a decade, and I can’t tell you how many times I’ve seen a perfectly good pump get ruined because someone skipped proper winter storage. I’ve had customers bring back pumps that stopped working after one season because they left water inside the motor housing, or rusted connectors because they didn’t dry the wiring properly, or even cracked plastic casings because they left the pump in freezing temperatures without any antifreeze or insulation.
The truth is, plastic swimming pool pumps are durable, but they’re not invincible—especially when you’re dealing with the kind of extreme cold, moisture, and fluctuating temperatures that winter brings. I’ve spent years testing storage methods for our own products, working with pool technicians across the country, and learning from the mistakes of thousands of customers, and today I’m going to walk you through exactly how to store your plastic swimming pool pump for the winter, step by step, so you don’t have to replace it next spring.
First, let’s talk about why winter storage for plastic swimming pool pumps is so critical. A lot of people assume that since these pumps are made of plastic, they’re immune to the kind of freeze damage that metal pumps get. That’s partially true—metal components like impeller shafts can rust, but plastic casings can actually crack if trapped water freezes and expands inside small crevices or passages. Even if you think you’ve drained all the water, there’s almost always a little bit left in the pump’s internal pathways, the filter housing, or the connection points. That tiny amount of water turns to ice, expands, and puts pressure on the plastic from the inside out. Over a few months, that pressure can lead to hairline cracks that you might not notice until you try to turn the pump on in May—and by then, it’s too late.
Another big issue is moisture and mold. If you store your pump damp in a closed, dark space like a shed or garage, any leftover pool water (which has chemicals in it, but also bacteria) can grow mold and mildew. That mold can get into the motor’s air vents, clogging them and making the pump work harder when you start it up next year. It can also corrode metal parts over time, even if they’re inside the pump, and leave a bad smell in the water when you first turn the system on.
So with that in mind, let’s get into the actual step-by-step process of storing your plastic swimming pool pump for winter. I’ll break this down into simple, actionable steps, and I’ll include tips specific to our pumps because we design them to be easy to service and store, so you don’t have to be a pool expert to do this right.
Step 1: Disconnect and Prep the Pump for Removal
Before you even touch the pump, make sure the pool has been drained to the correct level. For above-ground pools, that usually means draining the water until it’s 2 to 3 inches below the skimmer. For in-ground pools (though our plastic pumps are most commonly used for above-ground, I know some customers use them for small in-ground setups), follow your pool’s manual, but the key is to get the pump away from the water line so you can disconnect it without making a mess.
Next, turn off the power at the circuit breaker—this is non-negotiable. I can’t tell you how many customers have tried to work on a live pump and gotten a shock, even if they think it’s unplugged. Unplug the power cord from the outlet too, and wrap the end in a plastic bag to keep moisture out of the wiring connections. If you have a solar-powered or battery-operated pump, disconnect the battery and store it separately (more on that later).
Once the power is off, disconnect the hoses from the pump’s intake and output ports. I always recommend using a soft cloth to catch any leftover water as you disconnect—even a tiny drip means there’s more water inside the pump than you think. Set the hoses aside to dry completely while you work on the pump.
Step 2: Drain Every Drop of Water From the Pump
This is the most important step, and it’s where most people go wrong. For our plastic swimming pool pumps, we include a small drain plug on the bottom of the pump housing, right near the base. Before you do anything else, unscrew that drain plug and tilt the pump forward at a 45-degree angle to let all the water flow out. Wait at least 5 minutes—don’t rush this. I’ve had customers skip this step, and when they came back in the spring, there was a quarter of a cup of water frozen inside the pump, enough to crack the plastic casing.
Once the water stops draining from the main housing, check the impeller housing—this is the part inside the pump that the water flows through, and it’s where a lot of trapped water hides. On most of our models, the impeller housing is easily accessible by unscrewing two small screws on the side of the pump. Pop that off, and wipe out any remaining water or debris with a clean, dry rag. If you have a small brush (an old toothbrush works great), gently clean any sediment from the impeller blades—debris here can get stuck over the winter and cause the pump to overheat when you start it up.
Don’t forget the strainer basket! That’s the clear plastic part on top of the pump that catches leaves and dirt. Empty that, wash it with soap and water to remove any pool chemicals or buildup, and let it dry completely. A lot of people leave the strainer basket on the pump over the winter, but it’s better to store it separately if you can—it’s easy to lose, and if there’s any moisture left in it, it can drip down into the pump housing.
Step 3: Clean the Pump Thoroughly
Once all the water is drained, take a few minutes to give your plastic swimming pool pump a good cleaning. Pool water has chlorine and other chemicals that can eat away at plastic over time if they’re left sitting. Use a mild dish soap and warm water (never use harsh chemicals like bleach or abrasives—they can scratch the plastic casing or damage the motor) to wipe down the entire pump: the main housing, the power cord, the impeller, and even the connectors for the hoses.
Pay special attention to the air vents on the motor housing. These are small slits that let the motor breathe, but they can also trap debris and moisture. Use a small, soft brush to gently clear any leaves, dust, or dried pool scum from the vents. If there’s stubborn buildup, use a slightly damp cloth (not wet!) to wipe the vents—just make sure they’re completely dry after.
While you’re cleaning, take a quick look for any damage. Check the plastic casing for cracks, the power cord for frayed wires, and the connections for rust or corrosion. If you spot a small crack in the casing, you can use a plastic epoxy to seal it before storing—this will prevent moisture from getting in over the winter. If the cord is frayed, don’t try to fix it yourself—give us a call, and we can send you a replacement power cord. Catching small issues now will save you from big problems when it’s time to open the pool.
Step 4: Dry Everything Completely
I can’t stress this enough: moisture is your pump’s worst enemy in winter. Even if you think the pump is dry, run a clean, dry cloth inside all the openings, and then leave the pump in a warm, dry area for at least 24 hours to air out. If you have a small fan, you can set it near the pump to speed up the drying process—just make sure the fan isn’t blowing directly on the motor, as that could cause static or damage the wiring.
Don’t forget the small parts! The drain plug, the strainer basket, the impeller housing screws, and even the hose connections—all of these need to be completely dry before you put them into storage. Any leftover moisture on these parts can lead to mold, rust, or even plastic degradation over the winter. I once had a customer who stored a pump with a slightly damp drain plug, and when he took it out in the spring, the plug had seized to the housing because of corrosion—he had to replace the whole pump. That’s a $100 mistake that could have been avoided with 10 extra minutes of drying.
Step 5: Choose the Right Storage Location
Now that your pump is clean and dry, you need to pick a place to store it that’s safe and will protect it from the elements. I don’t recommend storing your pump outside, even if you cover it with a tarp. Tarp can trap moisture, creating a humid environment that’s perfect for mold and corrosion. Plus, even if it’s sunny during the day, temperatures can drop below freezing at night, and wind can blow debris into the tarp, scratching the plastic.
The best storage location is a cool, dry, indoor space—like a basement, a garage that’s insulated, or a garden shed that’s airtight. Avoid places that get direct sunlight, because UV rays can break down plastic over time, making it brittle. Also, don’t store the pump near chemicals like fertilizer, paint, or cleaning supplies—fumes from these can damage the plastic casing and the motor.
If you have a small plastic swimming pool pump (which most of our models are), you can even store it on a shelf or in a plastic bin to keep dust out. If you do use a bin, make sure it’s breathable—don’t seal it completely, because that can trap any remaining moisture. You can also wrap the pump in a clean cotton sheet or a plastic tarp (make sure the tarp is perforated or has small holes for ventilation) for extra protection.
For customers who have battery-operated or solar-powered plastic swimming pool pumps, there’s an extra step: remove the battery and store it separately in a cool, dry place. Don’t store it in the pump, because cold temperatures can drain the battery and damage it over the winter. Check the battery’s charge level before storing it, and top it off every couple of months if you can—this will keep it working when you need it next summer.
Step 6: Final Checks Before Putting It Away
Before you close up storage, do a quick final check: make sure all the parts are accounted for (drain plug, strainer basket, screws, hoses), that the pump is completely dry, and that there’s no debris left inside or on the surface. Take a photo of the pump if you want, just so you know what it looks like when it’s in good shape—this can help you spot any changes when you take it out in the spring.
Once you’ve done all that, you can put your pump away. I know it’s tempting to just toss it in a corner and forget about it for 6 months, but taking these steps will make sure your pump is ready to go when you open your pool in the spring. I’ve seen customers who follow this process have their pumps last 5, 7, even 10 seasons—while customers who skip these steps have to replace theirs every 2 or 3 years. That’s a huge difference in cost, and it’s all because of a little bit of planning.
Now, I want to add a few tips specific to our Plastic Swimming Pool Pumps line, since we design our products with winter storage in mind. First, all our pumps come with a universal drain plug, so you don’t have to worry about finding the right one. Second, our plastic casings are made from UV-resistant material, but that doesn’t mean they’re immune to cold or moisture—so don’t skip the drying step. Third, if you ever have a question about storing your specific pump model, our team is here to help. We’ve designed every pump we sell, so we know exactly what works for them, and we can walk you through any step if you’re not sure.
I also want to address a common question: do I need to add antifreeze to my plastic swimming pool pump? The answer is, only if you live in an area where temperatures drop below 20 degrees Fahrenheit for extended periods. For most people, if you’ve drained all the water and dried the pump thoroughly, antifreeze isn’t necessary. But if you live in a place like Minnesota or Maine where winter temperatures stay below freezing for months, you can use non-toxic propylene glycol antifreeze (never use automotive antifreeze—it’s toxic and can damage the pump) to flush a small amount through the pump’s internal pathways. Just make sure you flush it out completely when you take the pump out in the spring, because antifreeze can clog the impeller if it’s left sitting for too long.
Another thing I always recommend: label your pump’s storage spot. Write something like “Plastic Pump for 12ft Above-Ground Pool” on a piece of paper and tape it to the bin or shelf. When you’re ready to open the pool next year, you won’t have to hunt for the right pump, and you’ll know exactly which parts go with it.
Now, what if you do make a mistake and your pump gets damaged over winter? Don’t panic. That’s why we offer parts and repair services for all our Plastic Swimming Pool Pumps. If you take your pump out in the spring and find a crack in the casing, a frayed cord, or a seized impeller, our team can help you fix it—most of the time, it’s cheaper to repair than to replace. But following the steps I outlined today will help you avoid that situation altogether.
At the end of the day, winter storage for your plastic swimming pool pump isn’t hard—it just takes a little time and attention. I’ve been doing this for years, and I’ve seen first-hand how a properly stored pump can make pool season that much easier. No more surprises when you turn the key in May, no more spending money on a new pump when you thought your old one would last, no more stress about getting your pool up and running on time.
If you have any questions about storing your plastic swimming pool pump, or if you’re in the market for a new one for next season, our team is here to help. We design, manufacture, and service Plastic Swimming Pool Pumps, and we’re always happy to answer questions, share tips, or help you find the right pump for your pool size and needs. We work with pool owners of all sizes, from small inflatable pools in backyards to larger above-ground setups, and we pride ourselves on making durable, easy-to-store pumps that last.

Don’t wait until the last minute to get your pump stored. Take an afternoon, follow these steps, and you’ll be glad you did when the sun comes back and it’s time to jump in the pool.
Self-priming Pump References:
- Pool Corporation. "Winter Storage Guide for Above-Ground Pool Equipment." 2022.
- National Spa and Pool Institute. "Best Practices for Pump Maintenance and Longevity." 2021.
- Plastics Industry Association. "Plastic Component Durability in Outdoor Cold Weather Applications." 2020.
- Personal field testing and customer data from Plastic Swimming Pool Pumps, 2013–2023.
Hangzhou Nanfang Ouke Pump Industry Co., Ltd.
As one of the most experienced plastic swimming pool pumps manufacturers in China, we have world-leading production equipment and strong manufacturing capabilities. Please feel free to wholesale bulk customized plastic swimming pool pumps from our factory. Welcome to contact us for pricelist.
Address: No.46, Renhe Subdistrict, Yuhang District, Hangzhou City
E-mail: Gy656169@outlook.com
WebSite: https://www.oukegroup.com/