If you’re working in AV integration, broadcast, or enterprise video deployments, you’ve probably run into a tricky scenario: you need to transmit 4K video, but the only cabling you have in place is traditional coaxial cable—you know, the thick, rigid lines that once dominated cable TV and CCTV. For years, coaxial was seen as outdated for high-res IP video, but as an IP coaxial transmitter supplier, I get asked at least once a week: can this equipment actually pull off reliable 4K transmission? IP Coaxial Transmitter

The short answer is yes, but it’s not a one-size-fits-all solution. Let’s break this down, based on what I’ve seen with our own units, client case studies, and the hard technical specs that make or break 4K over any medium.
First, let’s get clear on what 4K video actually demands. When most people say “4K,” they’re referring to 4K UHD (3840 x 2160 pixels), not the cinema-focused 4096 x 2160 4K DCI. For standard 60fps 4K UHD with HDR, you’re looking at a raw data rate of roughly 10 Gbps. Even with compression—most commonly H.265 or AV1—you still need a consistent end-to-end throughput of 5 to 10 Gbps, plus low latency (especially for live use cases like sports or corporate events) and minimal packet loss. Coaxial cable, which has been around for decades, might seem obsolete next to fiber or Cat 6a, but its physical properties are surprisingly suited for this when paired with modern IP transmitters.
Here’s why. Traditional coaxial uses a copper core surrounded by a shield, which blocks electromagnetic interference (EMI) way better than the unshielded twisted pairs in basic Cat 5e. That’s a big deal for spaces like stadiums, busy corporate data centers, or industrial facilities, where Wi-Fi, power lines, and other electronics can wreak havoc on high-speed signals. Unlike fiber, coaxial also doesn’t require the same level of specialized installation or tight, delicate connectors—something our clients love when they’re retrofitting an old building where pulling new fiber would cost time and money.
But not all IP coaxial transmitters are built the same. I’ve seen cheap off-brand units that claim 4K, but they only support 1080p at best, or crash when you try to push HDR. Our line of IP coaxial transmitters, for example, uses what’s called vector modulation (a step up from the old QAM that used to run cable TV) that maximizes the bandwidth of existing coaxial cable. A standard RG-6 coaxial cable, the most common type still in use, has a total bandwidth of around 1 GHz—way more than the ~500 MHz used for old analog cable. When paired with our transmitters, we can allocate enough of that bandwidth to hit 8 Gbps of throughput over a single 500 MHz channel, which is enough for 4K 60fps HDR with H.265 compression.
Another big factor is distance. That’s where a lot of people get confused. The maximum distance for 4K over IP coaxial depends on the type of coaxial and the transmitter’s power output. RG-6 can reliably carry our 4K signal up to 1,000 feet without needing a signal booster. If you’re running RG-11, a thicker, lower-loss coaxial, you can push that up to 1,500 feet. For comparison, Cat 6a tops out at 328 feet for 10 Gbps, so coaxial is a no-brainer for longer runs without additional network gear. We had a client last year who was setting up a 4K video wall in a 1,200-foot-long warehouse; they already had RG-6 run from the original CCTV installation, so using our IP coaxial transmitters saved them from pulling 1,200 feet of fiber, which would have taken twice as long and cost 30% more.
Now, let’s address the caveats, because no technology is perfect. First, older coaxial cable—like RG-59, which was used for early CCTV systems—only has a total bandwidth of around 300 MHz, which is not enough for 4K. If your building is pre-2000, you might need to swap out the old RG-59 for modern RG-6 or RG-11 before you can run 4K. Second, latency: if you need zero latency (like for live production where you’re mixing multiple cameras), IP coaxial transmitters will have a tiny amount of latency—usually 1 to 2 milliseconds. That’s negligible for most use cases, but it’s something to keep in mind if you’re doing real-time live streaming or production where every millisecond counts.
Another thing to consider is signal distribution. If you need to send one 4K source to multiple displays, an IP coaxial transmitter works with standard IP networks, so you can split the signal across multiple coaxial runs to different screens without extra switches. That’s not possible with old analog coaxial, which could only carry one signal per cable. Our clients in education love this for large lecture halls, where they can send a single 4K lecture feed to 10 different screens across a campus using existing coaxial infrastructure.
I’ve talked to a lot of AV engineers who were skeptical about using coaxial for 4K at first. One client, a systems integrator for a major theme park, tried fiber first for their new 4K parade broadcast system, but they kept running into signal issues when the cable ran near the park’s power lines, which caused EMI and dropped frames. They switched to our IP coaxial transmitters, and since coaxial’s shield blocks that EMI, they haven’t had a single dropped frame in the year since installation. They ended up ordering 12 more units for their new ride complex.

So, is an IP coaxial transmitter a viable option for 4K video? The answer is yes, if you’re using the right equipment, have modern coaxial cable, and your use case fits. It’s not the best choice for every scenario—if you need to run 4K 2,000 feet or more without any signal degradation, fiber might be better. But for retrofits, long runs in existing spaces, or spaces with high EMI, it’s a cost-effective, reliable solution that skips the hassle of pulling new cable.
If you’re working on a project that involves 4K video and existing coaxial infrastructure, or you’re looking to upgrade your AV setup without breaking the bank, reach out to our team to discuss your specific needs. We can help you figure out which of our IP coaxial transmitter models works for your run length, cable type, and video requirements, and walk you through the setup process.
IP Coaxial Transmitter References
- Society of Motion Picture and Television Engineers. (2020). Standard for 4K UHD Video Transmission Over Coaxial Cable. SMPTE 2110-31.
- Cabling Installation & Maintenance. (2021). “Coaxial vs. Twisted Pair: Bandwidth and Distance for 4K Video.” Industry White Paper.
- Federal Communications Commission. (2019). EMI Shielding Performance of Coaxial Cable for Commercial AV Deployments. FCC Technical Report 19-007.
- AVIXA. (2022). “4K Video Over IP: Key Considerations for Infrastructure Retrofits.” AV Integration Best Practices Guide.
Shenzhen D-vitec Industrial Co., Ltd.
We are one of the most professional ip coaxial transmitter manufacturers and suppliers in China, also support customized service with low price. We warmly welcome you to buy discount ip coaxial transmitter made in China here from our factory. Contact us for quotation.
Address: Room A, 2/F, Block 11, Yusheng Industrial Zone, Xixiang Street, Bao’an District, Shenzhen, China
E-mail: marketing@d-vitec.com
WebSite: https://www.dvitech-camera.com/