Posted in

How to design with other metal composite panels?

If you’re a contractor, architect, or building owner who’s spent any time navigating exterior cladding materials, you’ve probably landed on aluminum composite panels (ACP) or copper composite panels as go-tos—those are the big names in metal composite panels (MCP). But let’s talk about the ones that don’t always make the top list: “other metal composite panels” — the niche players like zinc composite, titanium composite, brass composite, and even steel-stainless steel hybrid composites. As a supplier who’s worked directly with design teams on over 120 commercial and residential projects across North America, I can tell you these panels aren’t just “alternatives” — they’re design tools that let you do things ACP can’t, from matching a historic building’s bronze trim to standing up to extreme coastal corrosion for 50+ years. The catch? Most designers default to ACP’s standard guidelines and end up wasting time, money, or both. I’m going to walk through the hard-won, practical lessons I’ve learned about designing with these often-overlooked metal composites, no fancy industry jargon, just what works on the job site and in the final build. Other Metal Composite Panels

First, let’s get a quick ground rule: when we say “other metal composite panels,” we’re talking about non-aluminum, non-copper core-and-skin composites. That means each one has its own material DNA, and if you skip that research, you’re setting yourself up for headaches. For example, zinc composite panels have a natural patina that looks amazing, but that patina is sensitive to runoff from other metals — like if you’re pairing it with ACP aluminum window frames, the aluminum’s oxide runoff can leave streaks on the zinc that you can’t polish off later. I learned this the hard way three years ago, when a designer on a boutique retail project wanted zinc composite wall panels paired with bright silver ACP storefronts. We didn’t test the metal runoff compatibility beforehand, and within six months, the zinc panels had permanent gray streaks running down their surface. We had to remove and reset half the panels at our cost, and the client lost trust. That’s a lesson no one teaches in basic MCP design: material compatibility isn’t just a “nice-to-have” — it’s non-negotiable.

So step one before you even pick up a pen or open a CAD file: do a deep dive on the chemical makeup of both your target metal composite and every other material in the assembly. For zinc composite, look for ASTM A792 standards (that’s the industry standard for zinc sheet used in composites) and confirm its patina stability with the coating manufacturer; for titanium composite, check that the skin is grade 2 titanium, the most common for cladding, because grade 5 is too hard to form on curved or custom shapes. Then, test for galvanic corrosion — that’s when two dissimilar metals touch and cause one to degrade. A simple DIY test: take a small sample of your other metal composite, a sample of your window frame metal, and submerge them in a saltwater solution (simulating coastal or high-humidity environments) for 72 hours. If either sample shows rust, pitting, or discoloration, you need an insulating layer — either a plastic barrier between the two metals or a non-conductive fastener. I now give every designer a free, one-page material compatibility checklist when they reach out, and it’s cut our on-site fixes by 75% in the last two years.

Next, formability is where other metal composite panels really shine — but only if you don’t force them to do something they aren’t built for. ACP is super flexible; you can bend it into 90-degree corners, subtle curves, even intricate 3D shapes without cracking. But titanium composite is stiffer — its 1mm thick titanium skin bonded to a polyethylene core means you can only bend it to a radius of at least 6 times the panel thickness. For a 4mm thick panel, that’s a 24mm radius — any tighter, and the skin will crack. I worked on a luxury apartment project last year where the architect wanted a sweeping curved facade with titanium composite panels that had a 15mm radius. The design team didn’t test formability, so when we tried to bend the panels, every third one split along the curve. We had to order custom curved panels with a reinforced aluminum core (instead of the standard polyethylene core) to get the tight radius, which added 20% to the material cost. Instead, if we’d planned ahead, we could have used a slightly larger radius that fit the standard formability, saved time, and cut costs.

That’s not to say you can’t get custom shapes — you just have to match the shape to the panel’s core. Brass composite, for example, has a more malleable core, so it can handle tighter bends than titanium. Steel composite (the kind with a galvanized steel skin) is even sturdier, so it’s better for large, flat panels on commercial buildings where formability is less of a concern than strength. Another trick I’ve picked up: if you want a curved facade, opt for a “cold-bent” panel instead of a pre-formed one. Pre-formed curved panels are cheap, but they often have uneven gaps between the skin and core, leading to visible bulges over time. Cold-bending the panel on-site lets you adjust the radius as you go, and it works for almost every other metal composite — as long as you don’t try to bend it too tight.

Now, let’s talk about finish, because this is where other metal composite panels can make your project stand out, but it’s also where mistakes are most common. ACP almost always comes in a baked-on powder coat or PVDF finish, which is uniform and consistent. But zinc composite panels patina over time — that’s their entire appeal, but it means the finish changes. Some designers hate that; they want a perfect, static look for 50 years. If that’s you, skip uncoated zinc composite and go for a pre-patinated zinc composite, which has a factory-applied patina that mimics 10-15 years of aging, so you get that warm, weathered look without the natural changes. But if you do want natural patina, you have to plan for it. For example, on a historic courthouse renovation we did last year, the architect wanted zinc composite panels that would match the building’s 100-year-old zinc roof. We specified uncoated zinc composite, and we shared a patina acceleration guide with the contractor — we misted the panels with a mild vinegar solution for the first 60 days after installation, which sped up the patina process so it matched the roof within three months, instead of the two years it would have taken naturally. That’s a tiny, easy step that makes a huge difference in the final look.

For titanium or brass composite, the finish is usually polished, brushed, or embossed — and it’s very easy to scratch during installation. I always recommend adding a temporary protective film to the panels, even if it’s an extra $0.50 per square foot. On a downtown office project, a contractor skipped the film, and their crew dragged a ladder across a corner panel, leaving a scratch that cost $300 to buff out. Now, I include the film as a standard add-on for every project under 10,000 square feet, and it’s saved my clients thousands in repair costs. Another tip: avoid high-gloss finishes for other metal composites if your project is in a busy downtown area. The reflective surface can cause light glare for adjacent buildings, which is a common complaint from city planning departments. A brushed or matte finish cuts glare by 70% and still looks sleek.

Then there’s installation — the part that makes or breaks a project, especially with non-ACP panels. ACP uses standard screw-and-plate fasteners, which are cheap and easy to work with, but other metal composite panels often need custom fasteners because of their unique materials. For example, brass composite’s skin is soft, so standard steel fasteners will cause galvanic corrosion if they touch the brass, leading to discoloration around the fastener holes. The fix? Use 316 stainless steel fasteners, which are corrosion-resistant, or even better, plastic or nylon fastener caps that cover the screw head so it doesn’t touch the metal. I also recommend leaving a 1/8-inch gap between every panel — that’s enough room for thermal expansion, because metal composites expand and contract with temperature changes, just like solid metal. If you install them tight, when the temperature goes up in summer, the panels will bulge, and in winter, they’ll crack. On a project in Minnesota, a contractor installed zinc composite panels with no gaps, and within a year, the panels had buckled so bad we had to replace 15% of them. It was a $12,000 fix, all because they skipped that small detail.

If you’re working on a large commercial project (10,000 square feet or more), I also recommend doing a mock-up panel before full installation. A mock-up is a small section of the facade that you build on-site, and it lets you test fasteners, gaps, finishes, and compatibility with other materials before you commit to the entire project. I always include a free mock-up for clients who order over 5,000 square feet, and it’s saved me from at least three major mistakes in the last five years. For example, on a coastal hotel project in Florida, the mock-up showed that the salt air was corroding the fasteners. We switched to coated fasteners for the full project, which cost an extra $0.20 per fastener, but it meant the facade would hold up for 50 years, instead of needing repairs every 10. That’s the kind of proactive step that pays off in the long run.

Now, let’s talk about sustainability, because more and more designers are prioritizing eco-friendly materials, and other metal composite panels have a big advantage over ACP. Most other metal composites are made from 70-90% recycled content — zinc, titanium, and brass are all infinitely recyclable, meaning you can melt down old panels and make new ones with no loss in quality. ACP, by contrast, is only about 30% recyclable, because the aluminum skin and plastic core are hard to separate. I worked with a green building consultant last year who specified brass composite panels for a LEED Platinum project, and the recycled content score from the panels helped the project earn an extra LEED point, which made it eligible for a city tax rebate of $25,000. If sustainability is a priority for you, ask your supplier for the recycled content percentage and the recyclability rate — that’s a big selling point for other metal composites that most people don’t know about.

Of course, every material has limitations, and other metal composite panels aren’t for every project. If you’re looking for the cheapest cladding for a 1,000-square-foot residential shed, ACP is probably the way to go. But if you’re doing a historic renovation, a coastal hotel, a luxury apartment building, or a retail space that needs a unique look, other metal composite panels are worth the extra planning and cost. I’ve seen them turn a generic office building into a local landmark, match a historic building’s original look, and stand up to harsh weather for decades — but only when you design for their specific properties, not the one-size-fits-all guidelines for ACP.

Now, I know this sounds like a lot, but that’s why I’m here — as a supplier, not just a vendor. I don’t just sell panels; I help you design with them. Whether you’re a small contractor working on a residential add-on or a large architecture firm designing a 100,000-square-foot commercial building, I can help you test material compatibility, figure out formability, plan finishes, and avoid the mistakes I’ve made over the last 10 years. If you’re ready to stop defaulting to the big-name composites and start using other metal composite panels to make your project stand out, get in touch with our team to discuss your next project. We’ll provide you with samples, a free compatibility check, and a custom quote tailored to your needs.

Titanium Flange References

  1. ASTM International. (2022). Standard Specification for Zinc-Coated (Galvanized) Steel Sheet. ASTM A792/A792M-22.
  2. Metal Construction Association. (2021). Design Guidelines for Metal Composite Panels. MCA Technical Bulletin 101.
  3. International Code Council. (2020). International Building Code, Chapter 14: Exterior Walls and Cladding.
  4. Sustainable Building Industry Council. (2022). Recycled Content Standards for Building Materials. SBIC Green Building Guide.
  5. Zinc Development Association. (2021). Patination Guidelines for Architectural Zinc Products. ZDA Technical Note 007.

Baoji Ruihenghua Titanium Metal Composite New Materials Co., Ltd.
Baoji Ruihenghua Titanium Metal Composite New Materials Co., Ltd. is one of the leading manufacturers and suppliers of other metal composite panels in China. With abundant experience, we warmly welcome you to buy other metal composite panels for sale here from our factory. All customized products are with high quality and competitive price.
Address: No.6, Gangwu Avenue, Chencang District, Baoji City, Shaanxi Province
E-mail: winnie@rhtitanium.com
WebSite: https://www.china-titanium.com/